Virtual test bench
Listen to the design
headphones recommendedCrossover build
Import files
In REW: File → Export → Export measurement as text. Any text file with frequency, value and optional phase columns works.
REW live link
Start REW's API (Preferences → API, or launch REW with -api). Measure in REW, then import here. This works in the offline lab copy; browsers block hosted pages from talking to your computer.
Measure with a mic
Start quietly. When sweeping a tweeter on its own, put a 10–20 µF capacitor in series to protect it. Gate length sets the lowest trustworthy frequency (6 ms ≈ 170 Hz).
Measurement library
assign curves to drivers to simulate with real dataCoil winding calculator
wind your own air-core or cored inductorsMultilayer coils use Wheeler's formula (about ±3 % for practical crossover coils); single-layer coils use Wheeler's solenoid formula. Resistance is for copper at 20 °C. Wind tightly and evenly, measure with an LCR meter, then remove a few turns at a time to trim the value.
Parts list
Values marked "fitted" were tuned against the driver's modelled or measured impedance, so they differ from textbook tables on purpose. Use film capacitors rated 100 V or more, air-core inductors in the woofer path (14–16 AWG keeps resistance low), non-inductive resistors, and mount neighbouring coils at 90° to each other.